Safe Patient Handling Equipment that is affordable and easy to use.
What more could you ask for?!
CH-1003 CH-6000 CH-2000
The CH-1003: Wheelchair to IV Pole Clamping System attaches easily to your existing wheelchairs and your IV Poles.
The Clamping System enables the transporter to focus on moving the
patient in a wheelchair without having to strain themself while holding
on to the IV Pole.
The CH-6000: Universal Clamp to IV Pole would fit on most beds, stretchers or many other types of patient handling equipment that has a round or square bar (horizontal or vertical) that range between the size of 1” to 2”.
The CH-2000: IV to IV Pole Clamping System was designed for maintenance and cleaning in mind but can also be used for patients that have multiple IV’s while in transit within your facility. No more struggling to move multiple IV Poles at one time. Simply attach the CH-2000 to the IV Poles you wish to move and you can bundle them or make a train.
NEW ITEMS
CH-1003QR: Quick Release CH-7000
The CH-1003QR: Wheelchair to IV Pole Clamping System (Quick Release) has the same
quality, ease of use and safety as the regular CH-1003 but with a bit
more versatility for being used in larger facilities with hundreds of
wheelchairs.
For
example: You have 100 wheelchairs that you would like to incorporate
into your Safety-Quality Program. You also have 30 designated personnel
and/or departments who will be utilizing these particular wheelchairs.
We would suggest purchasing a CH-1003QR System that includes:
30 of the CH-1003: Wheelchair to IV Pole Clamping System (minus Locking Bolt and Anchors)
30 of the CH-1003-E: Quick Release Pin
100 of the CH-1003-A: Anchors
+ Each wheelchair would be fitted with an Anchor,
+ Each person/department would have their own Clamp along with the Quick Release Pin,
+ The Clamps can be put on and taken off as needed, the only part that would stay on the
wheelchair permanently would be the Anchor.
The CH-7000: Wheelchair to IV Pole Connector Clamping System (1” to 2”) - This Wheelchair Clamp is to be used with IV Poles that have a diameter of 1" to 2". The Special IV Clamp end wraps around the entire range of square or round bars, from 2" OD down to 1" OD, all without marring the equipment.
The unique 2 position latch on the link saves time when switching from a 2" bar to a smaller
bar, just connect to the second latch for the smaller sizes. The quick release handle takes
only 2 turns to be able to drop the locking mechanism, and release the clamp from the bar.
Please contact us direct if you have any questions!
 Proudly made in Michigan!
| 
No comments:
Post a Comment