Safe Patient Handling Equipment that is affordable and
easy to use.
What more could you ask for?!
CH-1003
CH-6000
CH-2000
The CH-1003: Wheelchair to
IV Pole Clamping System attaches easily to your
existing wheelchairs and your IV Poles. The Clamping
System enables the transporter to focus on moving the patient in a
wheelchair without having to strain themself while holding on to the IV
Pole.
The CH-6000: Universal
Clamp to IV Pole would fit on most beds, stretchers or many
other types of patient handling equipment that has a
round or square bar (horizontal or vertical) that range between the
size of 1” to 2”.
The CH-2000: IV to IV Pole
Clamping System was designed for maintenance and cleaning
in mind but can also be used for patients that have multiple IV’s
while in transit within your facility. No more
struggling to move multiple IV Poles at one time. Simply attach
the CH-2000
to the IV Poles you wish to move and you can bundle them or make a
train.
NEW ITEMS
CH-1003QR: Quick Release
CH-7000
The CH-1003QR: Wheelchair to IV Pole Clamping System
(Quick Release) has the same quality, ease of use and safety
as the regular CH-1003 but with a bit more versatility for being used
in larger facilities with hundreds of wheelchairs.
For example: You have 100 wheelchairs that you would
like to incorporate into your Safety-Quality Program. You also
have 30 designated personnel and/or departments who will be utilizing
these particular wheelchairs.
We would suggest purchasing a CH-1003QR System that includes:
- 30 of the
CH-1003: Wheelchair to IV Pole Clamping System (minus Locking Bolt
and Anchors)
- 30 of the
CH-1003-E: Quick Release Pin
- 100 of the
CH-1003-A: Anchors
+ Each wheelchair would be
fitted with an Anchor,
+ Each person/department would
have their own Clamp along with the Quick Release Pin,
+ The Clamps can be put on and
taken off as needed, the only part that would stay on the
wheelchair
permanently would be the Anchor.
The CH-7000: Wheelchair to IV Pole Connector
Clamping System (1” to 2”) - This Wheelchair Clamp is
to be used with IV Poles that have a diameter of 1" to 2".
The Special IV Clamp end wraps around the entire range of square
or round bars, from 2" OD down to 1" OD, all without
marring the equipment.
The unique 2 position latch on the link saves time when
switching from a 2" bar to a smaller
bar, just connect to the second latch for the smaller
sizes. The quick release handle takes
only 2 turns to be able to drop the locking mechanism, and
release the clamp from the bar.
Please contact us direct if you have any questions!
 Proudly made in Michigan!
|
